Home   ::  Login   ::  Register   ::  Post

:: Computers & Technology

the show interface switchport command

SpiderTip
SpiderTip
Posted: 2014-02-28

show interface gigabitEthernet [interface #] switchport will display a port configuration including Mode, encapsulation, vlan, etc. See the the example below. switch# show interface gigabitEthernet 1/0/48 switchport Name: Gi1/0/48 Switchport: Enabled Administrative Mode: dynamic auto Operational Mode: static access (member of bundle Po2) Administrative Trunking Encapsulation: dot1q Operational Trunking Encapsulation: native Negotiation of Trunking: On Access Mode VLAN: 1 (default) Trunking Native Mode VLAN: 1 (default) Administrative Native VLAN tagging: enabled Voice VLAN: none Administrative private-vlan host-association: none Administrative private-vlan mapping: none Administrative private-vlan trunk native VLAN: none Administrative private-vlan trunk Native VLAN tagging: enabled Administrative private-vlan trunk encapsulation: dot1q Administrative private-vlan trunk normal VLANs: none Administrative private-vlan trunk associations: none Administrative private-vlan trunk mappings: none Operational private-vlan: none Trunking VLANs Enabled: ALL Pruning VLANs Enabled: 2-1001 Capture Mode Disabled Capture VLANs Allowed: ALL Protected: false Unknown unicast blocked: disabled Unknown multicast blocked: disabled Appliance trust: none

© Copyright 2019-2020 SpiderTip.Com