All Stories

How to configure static route on Cisco router

Static route is form of routing protocol used to route or link up different networks on a router. It’s a manual entry on the router configuration that sends traffic to specific network to a known route. All static routes must…
Listed In: > Computers
Interior Gateway Protocol (IGP)

IGP – Interior Gateway Protocol is used to exchange routing information between multiple routers in Autonomous System (single organization network). It consists group of other routing protocols such as Open Shortest Path (OSPF), Routing Information Protocol (RIP), Intermediate System to…
Listed In: > Computers
Extend Trace Route (Tracert)

Trace Route is command based tool that is widely used to trace the data path to the destination device. For example, to check the path from my router to spidertip.com. I would type trace rout spidertip.com and that would show…
Listed In: > Computers
7 Persuasive Tips From Semalt On How To Avoid Catching Malware

img src=’http://spidertip.com/wp-content/uploads/2017/10/Internet.jpg’ It would not be wrong to say that the internet has made our lives easy. It is one of the best creations and connects us with our friends and family members across the globe. Accessing information and communicating…
Listed In: > Computers
Stacking Cisco Switches – Useful commands

Switch stacking is process of combining two or more switches into single switch by using special cable called Stacking-cable and connecting them through their StackWise ports. Stacked switches become single unit switch. TO build a stcking, the OIS must be…
Listed In: > Computers

VTP Prunning is way to reduce broadcast traffic going to unnecessary switches on your LAN especially when VTP is enabled. To enable VTP Prunning on your Cisco switch, use the commands below: SW03#conf t Enter configuration commands, one per line.…
Listed In: > Computers
How to Configure VTP (VLAN Trunking Port Protocol)?

VTP or VLAN Trunking Protocol is a protocol to automatically propagates VLAN configurations across the switches on your LAN. The main benefit of using VTP is to distribute VLAN database on all switches. Ideally the only manual thing you would…
Listed In: > Computers